Chevy Engine Starter Plate Kit, Small Block Engine To TurboHydra-Matic

Description

Allows You To Adapt A TH Transmission To An Original 1955-56 265 V8
May Also Be Used To Repair Any Small Block Chevy 1957-Up With A Broken Starter Mount Pad
Must Be Used WIth Starter P/N 57-132148
Made In USA
Will Only Fit 2-Piece Main Seal Up To 1985This bolt-on plate allows use of the original bellhousing mount starter when installing a TH 350/400/700R4 Automatic Transmission. Kit Includes: steel plate, hardware & thread-locker.
If you are installing a later model automatic transmission in your 1955-1956 classic with a 265 V8, which has no provisions for a block mounted starter, you will need this plate
Our eBay Store
Contact Us
Chevy Engine Starter Plate Kit, Small Block Engine To TurboHydra-Matic Transmission, 1955-1957
Part Number: 57-132290-1
Allows You To Adapt A TH Transmission To An Original 1955-56 265 V8
May Also Be Used To Repair Any Small Block Chevy 1957-Up With A Broken Starter Mount Pad
Must Be Used WIth Starter P/N 57-132148
Made In USA
Will Only Fit 2-Piece Main Seal Up To 1985
This bolt-on plate allows use of the original bellhousing mount starter when installing a TH 350/400/700R4 Automatic Transmission. Kit Includes: steel plate, hardware & thread-locker.
If you are installing a later model automatic transmission in your 1955-1956 classic with a 265 V8, which has no provisions for a block mounted starter, you will need this plate. This starter plate mounts between the rear of the engine and the transmission providing an original style mounting surface for your starter like the one in your stock bellhousing. You can also use this plate in 1957 models with broken starter mount holes or pads. Use in a 1957 model will require using a 1955-1956 style transmission mounted starter. Will work with all popular GM automatic transmissions. Use of a 168 tooth flexplate is required. Installation hardware included.